/*
    Copyright 2008,2010,2011 Will Stephenson <wstephenson@kde.org>
    Copyright 2011-2013 Lamarque Souza <lamarque@kde.org>
    Copyright 2013 Jan Grulich <jgrulich@redhat.com>

    This library is free software; you can redistribute it and/or
    modify it under the terms of the GNU Lesser General Public
    License as published by the Free Software Foundation; either
    version 2.1 of the License, or (at your option) version 3, or any
    later version accepted by the membership of KDE e.V. (or its
    successor approved by the membership of KDE e.V.), which shall
    act as a proxy defined in Section 6 of version 3 of the license.

    This library is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
    Lesser General Public License for more details.

    You should have received a copy of the GNU Lesser General Public
    License along with this library.  If not, see <http://www.gnu.org/licenses/>.
*/

#ifndef NETWORKMANAGERQT_NETWORKMANAGER_H
#define NETWORKMANAGERQT_NETWORKMANAGER_H

#include "NetworkManagerQt-export.h"

#include <QtCore/QtGlobal>
#include <QtDBus/QtDBus>

#include "device.h"
#include "activeconnection.h"

/**
 * This class allows querying the underlying system to discover the available
 * network interfaces and reachable networks. It has also the
 * responsibility to notify when a network interface appears or disappears.
 *
 * It is the unique entry point for network management. Applications should use
 * it to find network interfaces, or to be notified about network related changes.
 *
 * Note that it is implemented as a singleton
 */
namespace NetworkManager {

enum Status {
    Unknown, /**< the networking system is not active or unable to report its status - proceed with caution */
    Asleep, /**< networking is inactive and all devices are disabled */
    Disconnected,/**< the system is not connected to any network */
    Disconnecting, /**< the system is breaking the connection */
    Connecting, /**< the system is not connected to any network */
    ConnectedLinkLocal, /**< a network device is connected, but there is only link-local connectivity */
    ConnectedSiteOnly, /**< a network device is connected, but there is only site-local connectivity */
    Connected /**< the system is currently connected to a network */
};
enum LogLevel {Error, Warning, Info, Debug};
Q_FLAGS(LogDomains)
enum LogDomain {NoChange, None, Hardware, RFKill, Ethernet, WiFi, Bluetooth, MobileBroadBand, DHCP4, DHCP6, PPP, WiFiScan, IPv4, IPv6,
                AutoIPv4, DNS, VPN, Sharing, Supplicant, UserSet, SysSet, Suspend, Core, Devices, OLPC, Wimax, Infiniband, Firewall, Adsl, Bond, Vlan
               };
Q_DECLARE_FLAGS(LogDomains, LogDomain)
/**
 * Describes the network connectivity state.
 * @since 0.9.8.1
 */
enum Connectivity {
    UnknownConnectivity = 0,
    NoConnectivity = 1,
    Portal = 2,
    Limited = 3,
    Full = 4
};
class NETWORKMANAGERQT_EXPORT Notifier : public QObject
{
    Q_OBJECT
Q_SIGNALS:
    /**
     * This signal is emitted when the system's connection state changes
     */
    void statusChanged(NetworkManager::Status status);
    /**
     * This signal is emitted when a new network interface is available.
     *
     * @param uni the network interface identifier
     */
    void deviceAdded(const QString &uni);
    /**
     * This signal is emitted when a network interface is not available anymore.
     *
     * @param uni the network interface identifier
     */
    void deviceRemoved(const QString &uni);
    /**
     * This signal is emitted when the status of the wireless changed
     */
    void wirelessEnabledChanged(bool);
    /**
     * This signal is emitted when the status of the wireless changed
     */
    void wwanEnabledChanged(bool);
    /**
     * This signal is emitted when teh status of the wimax changed
     */
    void wimaxEnabledChanged(bool);
    /**
     * This signal is emitted when the status of the wireless changed
     */
    void wirelessHardwareEnabledChanged(bool);
    /**
     * This signal is emitted when the status of the wireless changed
     */
    void wwanHardwareEnabledChanged(bool);
    /**
     * This signal is emitted when the status of the wimax hardware changed
     */
    void wimaxHardwareEnabledChanged(bool);
    /**
     * This signal is emitted when the status of overall networking changed
     */
    void networkingEnabledChanged(bool);
    /**
     * This signal is emitted when a new connection was made active
     *
     * @param path the path of the new connection
     */
    void activeConnectionAdded(const QString &path);
    /**
     * This signal is emitted when an active connection is no longer active
     *
     * @param path the path of the removed connection
     */
    void activeConnectionRemoved(const QString &path);
    /**
     * This signal is emitted when the set of active connections changes
     */
    void activeConnectionsChanged();
    /**
     * This signal is emitted when the NetworkManager DBus service goes away
     */
    void serviceDisappeared();
    /**
     * This signal is emitted when the NetworkManager DBus service appears
     */
    void serviceAppeared();
    /**
     * Emitted when the global connectivity changes.
     * @since 0.9.8.1
     */
    void connectivityChanged(NetworkManager::Connectivity connectivity);
    /**
     * Emitted when the primary connection changes.
     * @param uni path of the new primary connection
     * @since 0.9.8.1
     */
    void primaryConnectionChanged(const QString & uni);
    /**
     * Emitted when the activating connection changes.
     * @param uni path of the new activating connection
     * @since 0.9.8.1
     */
    void activatingConnectionChanged(const QString & uni);
};

/**
 * Get the NetworkManager version
 */
NETWORKMANAGERQT_EXPORT QString version();
/**
 * Compares NetworkManager's version to the parameter version.
 * returns 1, -1 or 0 if NetworkManager's version is greater, less or equal to parameter.
 */
NETWORKMANAGERQT_EXPORT int compareVersion(const QString &version);
/**
 * Compares NetworkManager version to x.y.z.
 * returns 1, -1 or 0 if NetworkManager's version is greater, less or equal to x.y.z.
 */
NETWORKMANAGERQT_EXPORT int compareVersion(const int x, const int y, const int z);
/**
 * Get the manager connection state
 */
NETWORKMANAGERQT_EXPORT NetworkManager::Status status();
/**
 * Retrieves the list of all the network interfaces in the system.
 * It includes both hardware and virtual devices.
 *
 * @return the list of network interfaces available in this system
 */
NETWORKMANAGERQT_EXPORT Device::List networkInterfaces();
/**
 * Find a new NetworkInterface object given its UNI.  This pointer is owned by the Solid
 * infrastructure.
 *
 * @param uni the identifier of the network interface to find
 * @return a valid NetworkInterface object if there's a device having the given UNI, an invalid one otherwise
 */
NETWORKMANAGERQT_EXPORT Device::Ptr findNetworkInterface(const QString &uni);
/**
 * Return the network device referenced by its IP interface name.
 * This is not system independent so programs that will use this method will not be portable.
 */
NETWORKMANAGERQT_EXPORT Device::Ptr findDeviceByIpFace(const QString &iface);
/**
 * Retrieves the status of networking (as a whole) in the system.
 * This is distinct from whether the system's networking is online or offline.
 * To check that, see @ref status().
 *
 * @return true if this networking is enabled, false otherwise
 */
NETWORKMANAGERQT_EXPORT bool isNetworkingEnabled();
/**
 * Retrieves the activation status of wireless networking in the system.
 *
 * @return true if this wireless networking is enabled, false otherwise
 */
NETWORKMANAGERQT_EXPORT bool isWirelessEnabled();
/**
 * Retrieves the status of wireless hardware in the system. This is typically
 * controlled by a physical switch so there is no way to set this in software.
 *
 * @return true if this wireless networking is enabled, false otherwise
 */
NETWORKMANAGERQT_EXPORT bool isWirelessHardwareEnabled();
/**
 * Retrieves the status of wireless broadband (Wireless WAN) in the system.
 *
 * @return true if this type of wireless networking is enabled, false otherwise
 */
NETWORKMANAGERQT_EXPORT bool isWwanEnabled();
/**
 * Retrieves the status of wireless broadband (Wireless WAN) hardware in the system. This is typically
 * controlled by a physical switch so there is no way to set this in software.
 *
 * @return true if this broddband hardware is enabled, false otherwise
 */
NETWORKMANAGERQT_EXPORT bool isWwanHardwareEnabled();
/**
 * Retrieves the activation status of wimax networking in the system.
 *
 * @return true if this wimax networking is enabled, false otherwise
 */
NETWORKMANAGERQT_EXPORT bool isWimaxEnabled();
/**
 * Retrieves the status of wimax hardware in the system. This is typically
 * controlled by a physical switch so there is no way to set this in software.
 *
 * @return true if wimax HW networking is enabled, false otherwise
 */
NETWORKMANAGERQT_EXPORT bool isWimaxHardwareEnabled();
/**
 * Activate a connection using the supplied device.
 *
 * @param connectionUni unique identifier for the connection to be activated
 * @param interfaceUni unique identifier of the network interface to be activated
 * @param connectionParameter can be used to specify extra parameters not specific to the NetworkInterface or the connection, eg which AP to use when several present with same ESSID in range (because ESSID does not guarantee that the AP is part of the network you want to join!)
 */
NETWORKMANAGERQT_EXPORT QDBusPendingReply<QDBusObjectPath> activateConnection(const QString &connectionUni, const QString &interfaceUni, const QString &connectionParameter);
/**
 * Adds a new connection using the given details (if any) as a template (automatically filling in missing settings with the capabilities of the given device and specific object), then activate the new connection.
 * Cannot be used for VPN connections at this time.
 *
 * @param connection connection definition to be added and activated
 * @param interfaceUni unique identifier of the network interface to be activated
 * @param connectionParameter can be used to specify extra parameters not specific to the NetworkInterface or the connection, eg which AP to use when several present with same ESSID in range (because ESSID does not guarantee that the AP is part of the network you want to join!)
 */
NETWORKMANAGERQT_EXPORT QDBusPendingReply<QDBusObjectPath, QDBusObjectPath> addAndActivateConnection(const NMVariantMapMap &connection, const QString &interfaceUni, const QString &connectionParameter);
/**
 * Deactivate this network interface, if active
 *
 * @param activeConnection identifier of the connection to deactivate
 */
NETWORKMANAGERQT_EXPORT void deactivateConnection(const QString &activeConnection);
/**
 * Access the list of any active connections
 *
 * @return a list of valid ActiveConnection objects
 */
NETWORKMANAGERQT_EXPORT ActiveConnection::List activeConnections();
/**
 * Access the list of any active connections paths
 *
 * @return a list of valid ActiveConnection paths
 */
NETWORKMANAGERQT_EXPORT QStringList activeConnectionsPaths();
/**
 * Get current logging verbosity level and operations domains
 */
NETWORKMANAGERQT_EXPORT QDBusPendingReply<QString, QString> getLogging();
/**
  * @return the network connectivity state
  * @since 0.9.8.1
 */
NETWORKMANAGERQT_EXPORT Connectivity connectivity();

/**
  * Re-check the network connectivity state.
  * @see connectivity()
  * @since 0.9.8.1
 */
NETWORKMANAGERQT_EXPORT QDBusPendingReply<uint> checkConnectivity();

/**
  * @return the "primary" active connection being used
  * to access the network. In particular, if there is no VPN
  * active, or the VPN does not have the default route, then this
  * indicates the connection that has the default route. If there
  * is a VPN active with the default route, then this indicates
  * the connection that contains the route to the VPN endpoint.
  * @since 0.9.8.1
  */
NETWORKMANAGERQT_EXPORT ActiveConnection::Ptr primaryConnection();

/**
 * @return an active connection that is currently
 * being activated and which is expected to become the new
 * primaryConnection() when it finishes activating.
  * @since 0.9.8.1
  */
NETWORKMANAGERQT_EXPORT ActiveConnection::Ptr activatingConnection();

/**
 * Find an ActiveConnection object for an active connection id
 *
 * @param uni the id of the ActiveConnection
 * @return a valid ActiveConnection object
 */
NETWORKMANAGERQT_EXPORT ActiveConnection::Ptr findActiveConnection(const QString &uni);

/**
 * Retrieves the interface types supported by this network manager.
 *
 * @return the interface types supported by the network manager
 */
NETWORKMANAGERQT_EXPORT Device::Types supportedInterfaceTypes();
NETWORKMANAGERQT_EXPORT void setNetworkingEnabled(bool enabled);
// implement in Notifier
NETWORKMANAGERQT_EXPORT void setWirelessEnabled(bool enabled);
NETWORKMANAGERQT_EXPORT void setWwanEnabled(bool enabled);
NETWORKMANAGERQT_EXPORT void setWimaxEnabled(bool enabled);
NETWORKMANAGERQT_EXPORT void sleep(bool sleep);
NETWORKMANAGERQT_EXPORT void setLogging(LogLevel, LogDomains);
NETWORKMANAGERQT_EXPORT NMStringMap permissions();
NETWORKMANAGERQT_EXPORT Notifier *notifier();

}

#endif